Complete Soda Fountain Assembly. Package includes everything needed to setup your own soda fountain system (Add Co2 Tank at bottom of screen). *Note: You can use either a Cold Plate or a Prechiller Unit to cool your syrup lines but they have to be cooled. A Prechiller Unit is a bit more expensive but you just hook it up and plug it in, no ice required. The Cold Plate (default) on the other hand will require an ice bin or sink of ice to set in for cooling requirements. 14-Button Bar Gun - 12 Flavor Buttons, 1 Soda Button, and 1 Water Button Cold Plate (default) or Prechiller Lancer Turbo Carbonator w/Backflow Preventor 12 Shurflo Bag-N-Box Pumps w-3/8" Fittings Taprite CO2 Regulator Norgren Secondary Mini Regulator Tubing: 1/4" hose (for Co2 lines) & 3/8" hose (from pumps to unit) & BIB Tubing (to Pumps from Syrup) 12 Bag-In-Box BIB Connectors (6 Coke, 6 Pepsi - please specify in comments how many of which one)Stainless Steel Connectors and O-clamps Complete Instruction Manual Co2 Tank Not Included, but can add it at the bottom. Note: Check your water pressure (water pressure should be between 50-60lbs. If pressure is too high you may need Small Water Pressure Regulator, if pressure is too low you may need a Water Booster.) | 
